Sagem 4320

  1. Lights description
  2. Inputs description
  3. Interface login
  4. Wireless
  5. Wireless SSID
  6. Wireless password
  7. Disable wireless
  8. Port forwarding
  9. Hard reset

Sagem 4320

  • ADSL , VDSL2, G.Bond, and FTTP capable
  • Wireless N (802.11n)
  • Backwards compatible for Wireless B/G
  • 2.4 GHz Only
  • 4 Ethernet Ports (no Gig-E port)
  • 16 Wireless clients allowed by default (can be changed)
  • Remote HTTP access

Understanding your Sagem 4320’s lights.

Picture of the lights on a Sagem 4320 modem

Your DSL modem has several lights which can be used to see current statuses, and diagnose installation and connection problems.

Power Light
-Green: Power is on
-Off: Power is off. Check connecting cables, and try another outlet.
-Red: A Problem. Try another outlet, power cycle, and hard reset modem. Seek replacement if still red.

Internet (@ symbol)
-Green: Connected to the Internet
-Blinking green: Traffic going out or coming in.
-Off: No Internet. Possibly needs configured or is in bridge mode.
-Red: Failing Authentication. The username and password combination in the modem is not correct. Sometimes a hard reset will correct.

-Green: Trained Up. The link between modem and Windstream is established.
-Blinking green: Establishing connection between modem and Windstream.
-Off: No connection seen between modem and Windstream.

-Green: Bonded. Both pairs have trained up.
-Blinking green: Establishing bonded connection between modem and Windstream.
-Off: Bonding not configured or no connection seen between modem and Windstream.

Wireless(Antenna with waves around it)
-Green: Wireless device connected.
-Green blinking: Wireless traffic going out or coming in.
-Off: No Wireless device connected.

-Off: Normal state
-Green blinking: WPS Mode Avtive
-Red: Solid or flashing red WPS light means there was a problem connecting via WPS. Reboot the modem and try WPS again.

LAN 1-4
-Green:   Ethernet port in use.
-Blinking green: Traffic passing.
-Off: Ethernet port not in use.


Picture of the inputs on a Sagem 4320 modem

Grey: Phone line
Yellow:    Ethernet ports
Red: WAN port for fiber optic connections.
Power: Power cord, only use provided power cord with this modem. If replacing a modem, never use the prior modem's cord.

Modem Interface
Find all modem configurations here including wireless settings and port forwarding.

How to get into the Interface:
Open your browser to:
Username: admin
Password: admin

Wireless Settings

Change your wireless network’s name. (SSID)
1. From the Interface click Wireless on the left side, then replace whatever is in the SSID with your preferred network name.

Change the wireless password or security type.
1. From the Interface click Wireless on the left side, then click Security.
2. The Network Authentication dropdown lets you specify the security type.
3. The WPA Pre-Shared Key is where you can specify the new password.

Disable wireless.
1. From the Interface click Wireless on the left side, then uncheck Enable Wireless, and click Apply/Save. Anything connected wirelessly will lose connection at this point. Check it again and click Apply/Save to toggle wireless back on.

Port Forwarding
In computer networking, port forwarding redirects a communication request from one address and port number combination to another.

With port forwarding, it is important that you know the IP address of your device you are forwarding ports to. To see what is currently connected to your 4320N modem, click on Device Info, and then ARP to view connected devices and their IP addresses.

Forwarding ports on the 4320N
1. Click Advanced Setup on the left to branch it out and then click UPnP.
2. Uncheck the Enable or disable UPnP protocol box, then click Apply/Save button.
3. Next, while still under Advanced Setup, click NAT.
4. Click the Add button.
5. Click Custom Service and type the name you want to use like "dervex camera"
6. In the Server IP Address specify the IP address of your device you are forwarding to.
7. In the Protocol box you can specify UDP, TCP, or both.
8. Specify the External Port Start, External Port End, and Internal Port Start. The Internal Port End field will change automatically.
9. Click the Apply/Save button.

Factory Reset
A factory reset will take the modem back to factory settings. That clears all settings like personalized wireless names, passwords, and port forwarding, etc. Depending on the state of the modem, sometimes a hard reset will restore services.
1. To reset, first find the reset pinhole at the back of the modem between the Power and Ethernet ports.
2. Take a small pointy object (a toothpick or a safety pin is best) and press it into the hole and hold for a minimum of 3 seconds until the lights on the modem flash.
3. Once the lights have stabilized check services again.

Looking for more help?

Contact us through email, live chat, or call us. 

Contact Us


See what Kinetic products are available to you

Enter your address to review products and pricing available in your area.

Already a customer?

See what Kinetic products are available to you.

Enter your address to review products and pricing available in your area.

Already a customer?

Or call to order 1-866-445-80841-866-445-8084 or .

Need help? Call 1-866-445-8084

We still can�t find your address. Contact us to see if you�re in our service area.

Contact us now to find out if you're located in one of our service areas.

Do we have this right?

Pick the correct address from this list to see the best deals available , or use that address.

Or call to order 1-866-445-8084 or .

We are experiencing technical difficulties but our team is currently working to resolve it.

In the meantime, please call 1-866-445-80841-855-314-1951 for immediate assistance.

Your address qualifies for a special deal!

Receive a $100 Kinetic Visa® prepaid card when you call-in and order* today.

* For call-in orders only. Requires Internet purchase. Local, State, or Federal government accounts are not eligible. Card is issued by MetaBank®, Member FDIC, pursuant to a license from Visa U.S.A. Inc. No cash access or recurring payments. Can be used everywhere Visa debit cards are accepted. Card valid for up to 6 months; unused funds will forfeit after the valid thru date. Card terms and conditions apply.

Change the address

FIBER is now available to your area.

Promo Month